whats in your garage?
#1281
06-03-2005, 03:23 PM
whats in your garage?
This is what I have collecting dust & taking up room in my shop:
1.) used lectron 44mm carb for a DS650
2.) used old HMF aluminum finish slip on exhaust for DS650
3.) used set of front spindles & hubs off of a 2001 standard DS650
4.) new/used set of 20X11x10 6ply xtc shedders on 10X10x.125 rims. They have about 6-8 passes on sand in 300'. The rims have no dents or dings. The tires have no holes, plugs or patches. The tires have 99.8% of tread & still have the rubber ******* on them. DS650 rear hub bolt pattern.
5.) stock DS650 heal guards in great shape.
6.) stock foot pegs off of a '01 DS650
What I need for my garage is the following:
1.) DS650 fan
2.) DS650 stator
3.) Baja foot pegs
4.) stock air filter
5.) rear flat track tires or slicks in any condition (has to hold air).
1.) used lectron 44mm carb for a DS650
2.) used old HMF aluminum finish slip on exhaust for DS650
3.) used set of front spindles & hubs off of a 2001 standard DS650
4.) new/used set of 20X11x10 6ply xtc shedders on 10X10x.125 rims. They have about 6-8 passes on sand in 300'. The rims have no dents or dings. The tires have no holes, plugs or patches. The tires have 99.8% of tread & still have the rubber ******* on them. DS650 rear hub bolt pattern.
5.) stock DS650 heal guards in great shape.
6.) stock foot pegs off of a '01 DS650
What I need for my garage is the following:
1.) DS650 fan
2.) DS650 stator
3.) Baja foot pegs
4.) stock air filter
5.) rear flat track tires or slicks in any condition (has to hold air).
#1282
06-05-2005, 12:05 AM
Pro Rider
Join Date: Sep 2004
Location: texarkana, ar
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
#1283
06-05-2005, 01:05 AM
whats in your garage?
ds motor stage 2,ported and polished,new exhaust valves. it will turn 13.5 to 13.9 on motor in the 1/4 mile. a little faster with the nos i have .
ported intake w/thicker tab drilled and tapped with NOS nozzle.
holley NOS with everything incl. fuel pump
radiator
ron wood cdi
pep stabalizer
gears 15,16,17 front
gears 37,40,42 rear
45muk/ with ron wood alcohol kit
tranny with new plates and springs and new water pump seals and shaft.
cables clutch and throttle
frame wrecked,but not cracked.
all wireing
trinity pipe and silender
extra rims and tires to.
well the whole bike for a deal..needs steering stem,plastichead light.write for pic.
MAKE OFFER FOR EVERYTHING.
ported intake w/thicker tab drilled and tapped with NOS nozzle.
holley NOS with everything incl. fuel pump
radiator
ron wood cdi
pep stabalizer
gears 15,16,17 front
gears 37,40,42 rear
45muk/ with ron wood alcohol kit
tranny with new plates and springs and new water pump seals and shaft.
cables clutch and throttle
frame wrecked,but not cracked.
all wireing
trinity pipe and silender
extra rims and tires to.
well the whole bike for a deal..needs steering stem,plastichead light.write for pic.
MAKE OFFER FOR EVERYTHING.
#1284
06-05-2005, 02:58 AM
#1285
06-05-2005, 03:05 AM
#1287
06-05-2005, 08:23 PM
#1288
06-05-2005, 10:17 PM
whats in your garage?
Just wondering. . .
Are there people that need something and are waiting for someone to post that they have one available?
I think there are probably quite a few people that have extra parts collecting dust but, don't post a big list. They usually respond when someone posts a need though.
Just wondering. . .
Are there people that need something and are waiting for someone to post that they have one available?
I think there are probably quite a few people that have extra parts collecting dust but, don't post a big list. They usually respond when someone posts a need though.
Just wondering. . .
#1289
06-06-2005, 01:23 AM
#1290
06-07-2005, 01:15 PM