test message

no error

 

KEEP TRIPPING OVER STOCK PIPE STOCK CDI STOCK FRONT FENDERS STOCK HEELGUARDS AND PEGS STOCK CLUTCH PRO CIRCUIT T4 EXHAUST

FOR A 2001 TRAIL BLAZER
STOCK PIPE
STOCK CLUTCH

IM LOOKING FOR A
BIGGER CARB
EXT SWINGARM
CAM
720 KIT
AFTERMARKET PISTON
DRAG PIPE

 

Not ATV related but thought id thro it in -
my system out of my truck ~ MTX Thunder 6000 12" sub in a Q-Logic angled enclosed box with a MTX 282 amp mounted on top the box with an 8 guage red and blue (for nice appearance) wiring kit and fuse. Used for about a year, perfect condition and shape.
Off my 2001 Dodge Ram 1500 4x4 Quad Cab short bed ~ Westin black nerf bars with mounting bars, only have 4 of the bolts that mount the tubes to the bars but any small bolts will do. They were used for about 1.5 years, took them off and sold the truck, perfect condition and shape, just need few small bolts. Bars fit 98-01 Quad Cab and will prob fit 94 - 01 club cab (dodge stopped making club cabs and just called them quad cabs, had 4 doors but they were not the full size doors, handles were on the inside.
Email - QuikNcrazY@aol.com will get pics

 

just got my frame back, so my garage REALLY needs a +6 swing-arm and a drag pipe...

 

My garage could really use a stock Mikuni needle for the stock DS650 carb.

 

Found a drag pipe (need to remove radiator fan to run the pipe.)

Now that the Tom Pro Rail is home, I need to find a home for the DS760 Pami. Too many toys! This is a steel for anyone looking at a 760 or 800 kit for their bike! If I were to sell it [img]i/expressions/face-icon-small-wink.gif[/img] [img]i/expressions/face-icon-small-wink.gif[/img] I'ld be looking to get less than what a full 760 or 800 kit would cost you and that's for the whole bike. Add everything up and it is a steel! TI axel (worth $750), Full Race Prep 760 with larger valves, cams, etc. would cost at least $5k, Dual FCR 39's would cost at least $750.

 

My garage has a stock Mikuni needle for the stock DS650 carb, I don't need. PM me

 

Looking to add a stock pipe off a baja to my garage.

I'm sure its a long shot but I'd like to add a 11.5 or 12:1 piston and upgrade the cams if anyone is tripping over some.

Spider webs are growing on a Ron Woods CDI and a great looking Red HMF pipe.

 

 

I am selling my 250ex. If you are interested email me at jsullivan1708@hotmail.com