whats in your garage?
#3151
04-03-2007, 11:08 PM
whats in your garage?
Gonna put my build off for awhile, so I have a couple of things I'd like to move out of my garage. I have a 14:1 HPR G6 stock bore piston..less than 3 hours on it and also have a like brand new TM45 with pumper installed and set up with the light spring mod as well as a thumb throttle cable and about 15 jets...PM me for details.
HPR14:1 G6 piston
TM45 carb and cable.
HPR14:1 G6 piston
TM45 carb and cable.
#3152
04-04-2007, 12:36 AM
whats in your garage?
Looking for aftermerket CDI. Can't afford Vortex, don't want procom, but I NEED a rev. limiter so I guess Woods is out?!?! What other GOOD - affordable options do I have?
Also anyone got any alum. sheetmetal or any kind of alum. laying around? .125 or .190 thick? Silly question but ya never know!
I could really use an alum. airbox to use as a temp. unless one of you would be so kind to just send me some dim. - WxHxD, hole locations for mounting/ intake holes, ect. that would be good enough for me!
Also anyone got any alum. sheetmetal or any kind of alum. laying around? .125 or .190 thick? Silly question but ya never know!
I could really use an alum. airbox to use as a temp. unless one of you would be so kind to just send me some dim. - WxHxD, hole locations for mounting/ intake holes, ect. that would be good enough for me!
#3153
04-04-2007, 03:14 PM
whats in your garage?
Originally posted by: DuneMe
Originally posted by: DuneMe
Looking the entire package below out of my garage in one lot:
Pami DS 760
Race Head
Dual FCR39's - with extra filters and outerwares
Undercut and kryo treated tranny with new-style shift forks
IMS foot pegs
New 520 chain conversion and extra sprockets - still have the factory lube on them - 10-minutes of honest use.
Fresh top-end (new cam-springs and new piston - in process). Piston alone is about $500.
New style head-light
Baja Lights
Tach
RW CDI
Lightened hubs
Chrome bumper
+2 forward A-Arms - CHROME
Works front shocks with piggy-backs
Polished Alum - Sprocket cover
Polished Alum - Gas Cap
Scott's oil filter
Other parts that could be delt with:
Extra engine (not put together - may be missing a couple low dollar parts)
I think I've got another extra head - above and beyond the one for the extra engine
ODP - High Flow Water Pump - brand-new - never used
Extra stock handlebars
Clutch basket and clutch hub
One or two extra clutchs - don't know how many, have to look
Extra stock hubs (rear)
Many misc. extra engine parts and pieces
Braided brake-cable (front) - not installed yet
Baja foot-pegs with kick-up (ripe for chrome plating)
TONS of extra misc. parts and pieces - nuts and bolts - old 530 chain and sprocket, spare brake pads, spark plugs, plug caps, stock pipe, carb, Alba pipe, gas caps, cables, controls, etc.
Looking to move the whole package. . . don't have the desire to break it all out.
Looking the entire package below out of my garage in one lot:
Pami DS 760
Race Head
Dual FCR39's - with extra filters and outerwares
Undercut and kryo treated tranny with new-style shift forks
IMS foot pegs
New 520 chain conversion and extra sprockets - still have the factory lube on them - 10-minutes of honest use.
Fresh top-end (new cam-springs and new piston - in process). Piston alone is about $500.
New style head-light
Baja Lights
Tach
RW CDI
Lightened hubs
Chrome bumper
+2 forward A-Arms - CHROME
Works front shocks with piggy-backs
Polished Alum - Sprocket cover
Polished Alum - Gas Cap
Scott's oil filter
Other parts that could be delt with:
Extra engine (not put together - may be missing a couple low dollar parts)
I think I've got another extra head - above and beyond the one for the extra engine
ODP - High Flow Water Pump - brand-new - never used
Extra stock handlebars
Clutch basket and clutch hub
One or two extra clutchs - don't know how many, have to look
Extra stock hubs (rear)
Many misc. extra engine parts and pieces
Braided brake-cable (front) - not installed yet
Baja foot-pegs with kick-up (ripe for chrome plating)
TONS of extra misc. parts and pieces - nuts and bolts - old 530 chain and sprocket, spare brake pads, spark plugs, plug caps, stock pipe, carb, Alba pipe, gas caps, cables, controls, etc.
Looking to move the whole package. . . don't have the desire to break it all out.
SOLD!
Wow, this is going to be a change!!!
#3155
04-04-2007, 07:14 PM
#3157
04-04-2007, 07:34 PM
whats in your garage?
Originally posted by: dznutz
cp custom drag chassis taking up space.[img]i/expressions/face-icon-small-mad.gif[/img]
cp custom drag chassis taking up space.[img]i/expressions/face-icon-small-mad.gif[/img]
[img]i/expressions/face-icon-small-smile.gif[/img]
#3158
04-04-2007, 08:25 PM
Military Rider
My hobbies are NASCAR, Rockin' in the Free World, and riding my Sand Pigs at every available opportunity.
My hobbies are NASCAR, Rockin' in the Free World, and riding my Sand Pigs at every available opportunity.
Join Date: May 2005
Posts: 1,804
Likes: 0
Received 0 Likes
on
0 Posts
whats in your garage?
Originally posted by: ERBEDS650
Aww com'on!! get yourself some red, blue, yellow, purple, green spray paint and do a rainbow frame!
[img]i/expressions/face-icon-small-smile.gif[/img]
Originally posted by: dznutz
cp custom drag chassis taking up space.[img]i/expressions/face-icon-small-mad.gif[/img]
cp custom drag chassis taking up space.[img]i/expressions/face-icon-small-mad.gif[/img]
[img]i/expressions/face-icon-small-smile.gif[/img]
EEEWWW! That would be like Jeff Gordon GHEY. Don't do that, you'd have people questioning your manhood.
Kind of like KaylasDaddy's POISON tribute bike.[img]i/expressions/face-icon-small-wink.gif[/img] j/k KD...
#3159
04-05-2007, 12:07 AM
#3160
04-05-2007, 03:45 PM
