just got back from a weekend trip...nasty wreck...im now in need of handle bars and steering stem and tie rods....need asap!!!

 

Hey all wrecked over the weekend and need a set of handlebars for 2005 baja x

 

FREE STUFF[img]i/expressions/face-icon-small-smile.gif[/img] stock yellow heat sheild-starting to crack at one of the bolt holes, stock heel guards-very nice shape,stock gas cap..just pay shipping.[img]i/expressions/face-icon-small-tongue.gif[/img]

 

My garage could use a vented gas cap.

 

My garage has:

-Stock steering stem

-Stock A-arms

-Stock tie rods

-Stock Exhaust pipe

-Stock axle (no hubs, just plain axle)

-Stock front shocks

-New 15t front sprocket

-Stock gas tank

 

<div class="FTQUOTE"><begin quote>Originally posted by: flyinds

i got some ims foot pegs with the kickups{SOLD].STILL HAVE THE IMS heels gaurds been installed but not rode with, also a transmisson out of a 04 baja x.

a friend has some extremes 20x10x10 8 paddles with the little rubber stringers on the paddles on black labels douglas wheels, also some sandstar front tires on black label douglas wheels. them two sets on yamaha bolt patterns. THANKS</end quote></div>

 

my garage is lookin for some more jam, either some milder cams or a carb

 

<div class="FTQUOTE"><begin quote>Originally posted by: DragonDJ11

This stuff is just collecting dust in the garage...



Full RWR Exhaust with both the open end, and supertrap end. It is used and has some rust on it. A good sandblast and powder coat would have her perfect. And a couple dings here and there.







HPR Lectron 48 with a 1-5 needle in it. Cable and RWR ported intake also sitting around in the way....</end quote></div>


TTT

 

My garage has two sets of black front fenders with brackets.
My garage has a set of nerf bars from an 04 Baja X.

My garage could use a vented gas cap, one from a Polaris Predator would even work.

 

edited.