i need a stock DS end cap for the exhaust anybody have an extra or know where I can get one please E-mail me!! old_mil_24pk_99@yahoo.com

 

Need aTach and some front rims
Could also use a bumper and grab bar

 

My garage really needs a +3 or +4 swingarm (DS)

 

I have a RWR TM48mm carb with RWR 48mm ported intake, thumb cable, K&N and Outerwear just sitting on the shelf.

 

Brand new RWR 40/34 oversize valves with seats.

 

How much for the TM48 and manifold?

Do you also have the +4 swingarm on eBay? Is it strong? Heavy? Did TVI stretch it?

 

When I can actually get IN the garage I'll let ya know...

 

Have a few things on the shelf in my garage
1. Two K&N filters for the stock air box for a DS
2. One outterwear for a K&N
3. One UNI filter for a stock DS airbox
4. stock DS heelguards
5. stock DS front fenders
6.
7.
8.
9. 22x11x10 Haulers 8 paddle on Douglas rims 10" Yamaha pattern
10. stock gas cap for DS
11.DS front plastic yellow
12.DS rear cut fenders yellow
13.20" Goodyear flat track tires on Douglas ds pattern

 

I got lying around

---tvi 102 cylinder(ringed with 10mm bolt holes) (1season)
---omaga 102 piston 12 to 1 (1season)
---baja foot pegs
---full stock exhaust
---front fenders

PM me!

 

i have an
TM 45 WITH JET KIT(95, 96, 97, NEEDLE AND ALOT OF OF MAINS AND PIOTS, ALKY KIT, PUMP IS ACTIVATED)
11.5:1 piston(only 1 ride on piston)
alba exhaust with open end and disc set w/ air fuel guage set up
ac nerf bar (just put on never ridden, ordered ims pro pegs and do not fit with heel guards)
stock muffler
stock yellow front fenders
dynojet kit for stock carb
stock carb

must sell make resonable offers. need to go bigger!!!!!!!