I Need Help!!! Quick!
#1
I Need Help!!! Quick!
How the hell do you install these Graydon aluminum radiator shrouds on a baja??!! There are three kinds of brackets. One obviously wont work because of the lights but that is ok! I need to know were the bracket's are suppose to go! It looks like me that the long bracket would probably go on top somewhere. There are medium and small ones also. HELP!!!!!!!
#2
I Need Help!!! Quick!
mine mounted to the screws on the front of the nose plastic you know the two black screws there, then there is two screws that mount the screen to the radiator. that probably isn't what you needed to know though, but my brackets were already on the shrouds that i got. ok just looked
1- long z shape goes on top to the screws i mentioned.
2-long L shape bottom use the replacement screw they sent the other ones are to short
3- short L shape top of the radiator
hope that helps, oh that makes me happy to know the baja lights i have in the box are going to be no fun[img]i/expressions/face-icon-small-sad.gif[/img]
1- long z shape goes on top to the screws i mentioned.
2-long L shape bottom use the replacement screw they sent the other ones are to short
3- short L shape top of the radiator
hope that helps, oh that makes me happy to know the baja lights i have in the box are going to be no fun[img]i/expressions/face-icon-small-sad.gif[/img]
#3
I Need Help!!! Quick!
Tony,
Between looking at the Aluminum shrounds on my 2001 & the Baja lights on my 2003 I think it could be a real 'adventure' to get that to work. Sandman's explaination of the brackets seems right on though. From my memory of where the shrouds physically sat, I think they may need to be trimmed a good amount to fit around or over the lights, however I have not tried to mount any on the Baja so I can't say for sure. (My shrouds are from CT, however they are the exact same as the Graydon.)
Between looking at the Aluminum shrounds on my 2001 & the Baja lights on my 2003 I think it could be a real 'adventure' to get that to work. Sandman's explaination of the brackets seems right on though. From my memory of where the shrouds physically sat, I think they may need to be trimmed a good amount to fit around or over the lights, however I have not tried to mount any on the Baja so I can't say for sure. (My shrouds are from CT, however they are the exact same as the Graydon.)
#5
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)