Chinese Quads Brands such as Jetmoto, Yamoto, Redcat, V-Bike, Hi Bird, and Kazuma

part id

Thread Tools
 
Search this Thread
 
Old Apr 4, 2015 | 05:47 PM
  #1  
princejj's Avatar
Thread Starter
|
Weekend Warrior
Joined: Apr 2015
Posts: 10
Likes: 0
Default part id

Got a Chinese quad for my son today and can't figure much out as far as brand there is no stamps anywhere. The problem I'm facing now is I'm missing a part on it and not sure what I'm missing. Directly under the seat on the same bracket as the battery box there is a 4 pin female connector that is missing whatever it's supposed to plug in? Any ideas? I can try to get a pic loaded if I can figure out how to do so but figured I'd try by describing to start
 
Reply
Old Apr 4, 2015 | 07:01 PM
  #2  
princejj's Avatar
Thread Starter
|
Weekend Warrior
Joined: Apr 2015
Posts: 10
Likes: 0
Default

After looking at pics online I think it's a kazuma panda
 
Reply
Old Apr 5, 2015 | 02:13 AM
  #3  
MPDano's Avatar
Pro Rider
Joined: Jul 2012
Posts: 607
Likes: 2
Default

Does it run?
 
Reply
Old Apr 5, 2015 | 07:42 AM
  #4  
princejj's Avatar
Thread Starter
|
Weekend Warrior
Joined: Apr 2015
Posts: 10
Likes: 0
Default

currently it will not even turn oveR. I hooked power to starter directly when i went to look at it and it turns over but to just press start button nothing happens
 
Reply
Old Apr 6, 2015 | 09:20 AM
  #5  
supermanotorious's Avatar
Winchmaster 5000
Joined: Mar 2015
Posts: 39
Likes: 0
From: Phoenix, AZ
Default

sounds like a wiring issue, are there any fuses you can check?
 
Reply
Old Apr 6, 2015 | 09:35 AM
  #6  
princejj's Avatar
Thread Starter
|
Weekend Warrior
Joined: Apr 2015
Posts: 10
Likes: 0
Default

Im guessing whatever is missing thats supposed to plug into the 4pin connection is the problem. Bought it with it missing guy didnt know what went there and im having hard time figuring out what it is. I was hoping someone had one and could tell me what goes there. Right off positive cable from battery is the fuse then couple inches further is a split in the wiring where 5 wires go into a 4 pin female connection. Looks like it should be right under seat maybe connected to back side of battery box theres a clip there with nothing attached
 
Reply
Old Apr 7, 2015 | 05:14 PM
  #7  
princejj's Avatar
Thread Starter
|
Weekend Warrior
Joined: Apr 2015
Posts: 10
Likes: 0
Default

I dont know how to add pics to this post but i took some and mad an album on my profile. If anyone could help me out on id of quad and what plugs into the connector in pic that would be very appreciated. Or explain how to load a pic to a post there is two buttons above the massage box but they want a url of a pic and there on my phone. I have a little boy itching to ride this thing. Thanks!
 
Reply
Old Apr 7, 2015 | 08:00 PM
  #8  
atv-wheeler's Avatar
Trailblazer
Joined: Sep 2013
Posts: 80
Likes: 0
Default

The 4 pin connector could be a missing relay or the cdi it self.
 
Reply
Old Apr 7, 2015 | 09:54 PM
  #9  
princejj's Avatar
Thread Starter
|
Weekend Warrior
Joined: Apr 2015
Posts: 10
Likes: 0
Default

I initially thought cdi but i cant find 4pin cdi anywhere. They are all 5 pin or 4 + 2 pin or 6 pin
 
Reply
Old Apr 7, 2015 | 10:15 PM
  #10  
MPDano's Avatar
Pro Rider
Joined: Jul 2012
Posts: 607
Likes: 2
Default

Voltage regulator according to this manual on the Panda wiring diagram. Plus it's a 4 pin. Look at page 26 on this pdf.

http://www.goscoot.com/kmx110_manual.pdf

http://www.ebay.com/itm/Voltage-Regulator-GY6-ATV-Honda-Kazuma-50cc-90-cc-110-CC-Scooter-12-Volt-/390659466908?hash=item5af51e669c&vxp=mtr
 
Reply



All times are GMT -5. The time now is 04:56 AM.