Cant identify my ATV
#1
Hey everyone im new to the fourm but i got a used ATV chinese on thr side id says wildcat 150 but when searching cant find anything in way of parts. So it it wrong or is there a better way to out what ATV i have. So i can look for parts.
#2
You didn't try very hard Loncin Wildcat 150F ATV - quad bikes Perth | Midland Road & Trail - Midland Road & Trail is proud to be an Authorised dealer for XTM , Boss Hoss, Loncin & Hisun and provide motobike riders with everything needed for the perfect ride.
If it is a Loncin there are loads of dealers for them.
If it is a Loncin there are loads of dealers for them.
#3
Hi,
im a 67 yr old who lives in new Orleans, I have been riding Harleys since 1964 - my currect ride is a 79 FXE that's 100 ci and has STD panheads on a shovel bottom,,
im here because I got a mini chopper for my grandson and hope to get the bike running -- im having issues with the wiring . maybe some of you more skilled can give me a hand.. this motor is a 125cc it has only 3 wires coming out the case next to the sprocket if your looking at the cdi box it has a pink wire on the bottom right - on the bottom center is a purple -- and the top right is a pink/baby blue -- its a 5 pin connector--
the other wiring harness is a box with 4 wires top right is a yellow -- bottom right is a blue/red -- left bottom is a blue/white and top left is a white -- now it has a green wire that has a male connector on it also--
im totally lost - if I can get spark and the battery to charge in can figure the rest-- seems to me its missing a body harness from the 2 controls on the handle bars -- this bike has a single disc brake on the front and a cable brake shoes on the rear -- its a older mini chopper -
this is a Chinese engine - electric start and automatic with reverse.
im hoping one of you wizards can help
thanks Rob
im a 67 yr old who lives in new Orleans, I have been riding Harleys since 1964 - my currect ride is a 79 FXE that's 100 ci and has STD panheads on a shovel bottom,,
im here because I got a mini chopper for my grandson and hope to get the bike running -- im having issues with the wiring . maybe some of you more skilled can give me a hand.. this motor is a 125cc it has only 3 wires coming out the case next to the sprocket if your looking at the cdi box it has a pink wire on the bottom right - on the bottom center is a purple -- and the top right is a pink/baby blue -- its a 5 pin connector--
the other wiring harness is a box with 4 wires top right is a yellow -- bottom right is a blue/red -- left bottom is a blue/white and top left is a white -- now it has a green wire that has a male connector on it also--
im totally lost - if I can get spark and the battery to charge in can figure the rest-- seems to me its missing a body harness from the 2 controls on the handle bars -- this bike has a single disc brake on the front and a cable brake shoes on the rear -- its a older mini chopper -
this is a Chinese engine - electric start and automatic with reverse.
im hoping one of you wizards can help
thanks Rob




