hey guys could use alittle help just put a set of mudlites on my boys twolf and am wondering what pressure i should put in them, cant find no info on tires, most riding is done on woods roads and trails, also want to put a set on my bruin would pressure be the same. thanks for the help

 

The max PSI should be listed on them at 7 psi. I run mine at 5.5 psi. I've seen others running as low as 3 psi for mud....I would stick in the 5 to 6 psi range.

dave

 

thanks dave i will try that. kris

 

What does the ATV manufacturer recommend? I run mine at 3.5 pounds, which is what Honda calls for in the Foreman.

 

We run 3 psi when rock crawlin and 4 psi when we are just trail riding.

 

thanks guys my owners manual says 3.6 is normal but that would be for the stock tires most likely the same for the mudlites.

 

I put mine at 7psi. when I got them from the ups guy they were all different but had between 12 and 20 psi.

 

Mine came from UPS with about 20 PSI in them, must have been from mounting. I run right at 5psi all the time, and find it to be a good all around pressure. I have had one rear tire leak down to nothing and other than being a little lower and wider, it still rode fine! I now check them before every ride.

 

I run them on my explorer and run 5 in the front and 4 in the rear. Little more in the front to steer easier and little less in the rear for traction.

 

I ride mine on 10 psi...gives me more floatation in tha water lol but also put dow to 7 from time to time...