Drivetrain, Suspension & Tires Discussions on ATV drivetrain, suspension, and tires.

air pressure

Thread Tools
 
Search this Thread
 
Old Jan 2, 2000 | 12:30 PM
  #1  
dan.t.'s Avatar
Thread Starter
|
Weekend Warrior
Joined: Dec 1999
Posts: 23
Likes: 0
Default

should the diameter of my tires( oem 400 explorer)be the same? i have the recomended pressure and the tires aren't equally 25" tall. would this cause drivetrain wear?
 
Reply
Old Jan 2, 2000 | 02:12 PM
  #2  
mattsibley's Avatar
Weekend Warrior
Joined: Aug 1999
Posts: 15
Likes: 0
Default

ok, on any atv tire, they usually will not be the actual hieght that is on the tire i.e.- 25 26 or 27 inches tall. So if you are running stock tires or any other tires for that matter and the diameter is what is recommended then you are ok. On my honda 300 the stockers were 23, and 24's. When I bought my vampsI bought 24 and 25's. You have to keep the stock ratio but if I had put 25's all around there might have been a possible problem, simply because on the stock bike it had a 1 inch smaller tire on the front than on the back? You got that, I know it was kind of confusing, let me know if you need anything else.

------------------
Matt Sibley

1999 Honda 300 4x4 Vampires, Lift Kit, 2500lb WARN winch
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bmxatv10
Yamaha
58
Oct 14, 2022 06:23 PM
handyjc1
ATC 3-Wheelers
1
Oct 23, 2015 07:15 PM
2many2ride
Honda
7
Sep 27, 2015 04:35 AM
MPDano
1) Engine problems..
6
Sep 20, 2015 09:48 PM
Hw00d
Yamaha
4
Sep 10, 2015 08:53 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 11:09 PM.