Bush Hog TH4400 Front CV Axles
#2
Axle Part Number: CAS305F2B.018. East Lake axle makes them.
fronts you need to use axle above and take it apart and put the new inner and outer on your old axle.
this same axle fits the rear.
Intella Parts makes the front brake calipers still brand new. They call them brake bodies.
https://intellaparts.com/p/BH-500622...h-Bushing.html
these struts you can use on the front of the machine. I installed them. Worked fine.
405673. Find the pair on Amazon. I’ll be adding to this as I continue to find parts.
fronts you need to use axle above and take it apart and put the new inner and outer on your old axle.
this same axle fits the rear.
Intella Parts makes the front brake calipers still brand new. They call them brake bodies.
https://intellaparts.com/p/BH-500622...h-Bushing.html
these struts you can use on the front of the machine. I installed them. Worked fine.
405673. Find the pair on Amazon. I’ll be adding to this as I continue to find parts.
#3
Did you find any other information?
I have an 06 Bush Hog TH4400 its missing the drivers rear CV. I figured I would replace all four however the teeth count are different from the 2006 Bush Hog to the Polaris 500...... Help
I have an 06 Bush Hog TH4400 its missing the drivers rear CV. I figured I would replace all four however the teeth count are different from the 2006 Bush Hog to the Polaris 500...... Help
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



