From the pics on his site it looks like he is running regular haulers, unless your damageing paddles some how and need something stronger you probably could save the money. The taller hauler is 3/16" taller, I haven't seen anybody running tallers on a banshee, you probably already have this http://www.skat-trak.com/ although they don't have any thing about the extreme's on there
back to the wrech's Later

 

I have the 22-11-10 extreme paddles and yes they fell apart on me ! Skat-trak did pull thru but it was like pulling teeth. They did not fix my old one's they just gave me a new set. The new ones seem to be holding together but i only have 2 rides on them so we will see!

 

I just got back from a 3 day trip to Little Sahara, I put 12hrs time on my 8 paddle 22 X 11 X 10 Extreme Haulers on 9" wide wheels (it rained all day Sat). Sand conditions went from very packed wet sand to dry powder, NO DAMAGE TO PADDLES (i just got mine 10 days ago so mabey they had a bad batch)!

These are great tires! They hooked in all conditions. No one wanted to get within 20ft of me because of the roost under power! It wasn't a tall roost (3 to 4 feet high) but it was grippin & throwin the sand. I'm very happy with them!

3 new pages of pics from Little Sahara on My Web Site So check them out!

 

Thats what im hoping for " that i go a bad batch" It pi$$ed me off that this happen but, i still believe that haulers are the best for sand drags!

 

Moose, thanks for the report. I assumed they would be the same as the regular Haulers but stronger. I wanted to get some new paddles since my regular Haulers are starting to tear in spots and thought why not get the Extreme ones.

Roostking, yea, I think you're think of the Taller Haulers. They seem like a bit too much paddle.

I'll probably go for the extreme Haulers... Then I just need to get some riding in. [img]i/expressions/face-icon-small-sad.gif[/img]

 

If your haulers are getting cracked or broke SkatTrac can fix them for you. I got 5 on one and 4 on my other replaced for about $7 a paddle. They removed the old ones and glued new ones on. They are like brand new for about $70.

 

Thanks, spinks250r. I might do that instead of new haulers.

I actually just ordered new tires/wheels all way around. I went cheap and thought I would give these a try. Anybody used these before?

Dunetracker-Front 21x8x10 on Douglas Aluminum .160
Dune Hopper-Rear 22x11x8 on Douglas Aluminum .160

 

Wyoduner,
Good luck on the new wheels and tires. I also just picked up a set of rear wheels and tires for the cinders(although with my new schedule, I probably wont be using them!) I got some 20x10x10 8 paddle sand sharks. Anyhow, I have my motor at Kenz cycle tech here in Phoenix. Hes doing a "play"port, boring my carbs, lightening my flywheel, advancing the timing +4, trueing and welding my crank, and I might have him polish the cylynders. Im also going to be getting some V Force reeds. All told im going to have about 1500 into it when Im done. Cant wait, should (better) be done for Walden! Later,

RoostKing...

 

Well, I hope you have that done by Memorial day. You can put a whooping on a few more of the Colorado/Wyoming boys.

I just ordered a bunch of stuff besides the tires:

Coolhead with 20cc domes (maybe 19 cc would be better for this altitude but you know me, better safe than sorry).

TORS eliminator kit for the stock thumb throttle.

Armadillo 6 pack rack.

Mega Flow Impeller (you sold me on that)

Different front & rear sprockets (12 tooth and 44 tooth plus what I already have) to gear correctly with the 22" paddles.

I just put in the +4 degree key yesterday (pain in the butt!!!)

Grips, silencer packing, and some other misc stuff.

I'm heading out to St. Anthony on May 9th so I hope everything is here long before then so I can get it installed.

 

WyoDuner if you and Roostking are going to be up at Walden on memorial day weekend, maybe we can hook up there. I realize it will be a madhouse on that weekend, but who knows... I'll be bringing the Zilla and a 400EX (girlfriend's ride), my Zilla has all yellow plastic/seat. Hope to see you guys there, and get some great riding in.