What would your Ultimate ATV consist of? I have ridden alot of them and this is what it would be for me.
I would start with the Rincon chassis, it has the best ride of all of them. I would add the Prarie 700 engine (the Prarie 650 smokes the Rincon 650), but I would use the tranmission from the Rubicon, not the Rincon. I would choose the brakes from the Rincon and the styling of the Rubicon. What would you choose?

 

My ultimate ATV is made by Arctic Cat, 650 V-Twin, independant suspension, front locker, huge ground clearance, 7 gallons of fuel, digital guages...... Shall I go on?[img]i/expressions/face-icon-small-happy.gif[/img]

 

My ultimate sport ATV would consist of...
-superlight chassis
-racing mototcycle engine
-long travel suspension
-and a whole lot of aftermarket parts

 

Well

A 250R frame, and one of those 134 horse $6,000 dollar Banshee engines.

 

mine would probably be a banshee engine with the 300ex turning ratio and duel alien pipes with the kfx700 brakes. also wit a k&n air filter.
oh yeah dont forget the nitrus kit. vvrrmmm vvrrmmm [img]i/expressions/face-icon-small-happy.gif[/img]

 

ultimate sport quad- 250r frame honda cbr999 motor. 22in of suspenion travel. have the R frame lighten up. 10 or 20 sets of tires for all situations

ute- rincon frame looks of a rubicon. rincon engine bored to like a 750 with all aftermarket parts. and liek soemone else said the tranny of the old rubicons that hondamatic tranny i love it.. and can go on and on..

 

Start with a honda 450 S

then add:

1) 500 cc twin engine
2) 6th gear
3) Rubicon suspension
4) Full skid plates and a arm protectors
5) larger gas tank
6) locking front diff
7) Retain the cooling system just increase the capacity so that it could pull 700 lbs @ 40 kmph or 25 mph in 30'C heat and your set

Keep it Simple and it will endure!

 

400EX Chassis with a Harley Davidson REVolution engine/ trans. +3/+2 A-Arms, +4 Aluminum swingarm. 4 Gallon fuel tank, Plastics from a Raptor or predator. 11x10x10 Rear Razr IIs for the trails, Haulers for the dunes. Front 11x7x9 Razr tires, all mounted on a nice set of beadlocks. Some sort of exhaust that would maintain the Harley sound and make it as loud as possible.

Hey, I can dream, can't I?

Seriously, I would like to see some sort of big motor in a 400 chassis. I'm talking at least 700cc. Email me some links if you have em.

 

I would probably have to go with the look of the raptor + the speed of a banshee + handling of one of the 400cc's [img]i/expressions/face-icon-small-smile.gif[/img]

 

i would say the handling of a 250r or 400ex, the reliableity of a honda, with the power and scaryness of a four cylnder yamaha banshee. so add it up that would be like a 1050cc or 700cc 2 stroke. and to be able to do awsome extended wheelies like 4 strokes. and have aftermarket big bore stroker kits that range from a 765 stroker to a 1125 stroker. and to have the sound of a regular banshee or the cafe bikes that you hear screaming down the road doing a barhop wheelie from a mile away. and to have the price of $12,000. and the bike should be sold at honda and yamaha shop. cause they both made it, two teams together. and should call it the appache or yzcbr700 or yzcbr1050.
AND THERE IS THE ULTIMATE SPORT 4WHEELER.[img]i/expressions/face-icon-small-shocked.gif[/img]