can i have an extra key made for my 300ex. If i can were can it be done at?

 

i would try to take it to a place where they copy keys and get them to just copy it that is what im going to do with mine.

 

like walmart r lowes r home depot ect.........

 

Some dealers cut keys and others do not.

Most locksmiths carry the key blanks required to cut them, but you will want to call around before driving.

There are 2 different Curtis key blanks that are used for Honda ATVs. HD-74 and HD-75

What you will need to do is pop the ignition out of the plastic and there will be a code stamped into the plastic. Usually the number has numbers and letters about 6 to 7 characters in length.......but the last 3 characters are all that is needed to cut a key.

Example.......C4G2D45.........Your key code is D45

A and B codes take HD-74 keyblanks...........and C and D codes uses HD-75 keyblanks.

After you find out which blank you need, you can make calls to locksmiths to find out if they have this blank.

Good Luck.

 

WalMart isn't going to be able to cut it and neither is any Home Dept.......unless these stores just started carrying waht is needed.

ATV key blanks are different from automobile and door lock blanks.

I'm the only guy within 150 miles who can cut ATV keys in my area.

Can you say monopoly?[img]i/expressions/face-icon-small-tongue.gif[/img]

 

really? i always thought u could just take it to anyplace that copies keys and have it done there huh i guess not.