I am replacing the timing chain on a 1979 110. Does anyone make a chain that has a materlink I can roll in like we
do on cars. If not than is there a special puller to get the metal reluctor off of the crank? Any help would be appreciated.

 

They do make "master links" for the 25H series chains (most 90-200 atc/trx's) - you can ask any of your local independant shops - they should have or can get them.

Down fall - you have to break both the new and old chain - then the "master link" has to be bradded after installing - I've found it to be just as fast or faster to just pull the magneto and do it the right way (of course I have all the pullers to do this [img]i/expressions/face-icon-small-wink.gif[/img])

 

Tried to find a puller. Cant seem to find one anywhere. If you have any ideas on who would have one for this old bike I would appreciate it. I tried denniskirk but they dont have any tools for this bike. If I cant find one I will just have to cut and get a crimping tool. I appreciate the help[img]i/expressions/face-icon-small-confused.gif[/img]

 

Save yourself a hassle and avoid the masterlink idea. If you can't find a puller, disassemble til the point you need the flywheel pulled, load up your rig and stop by a Honda dealer. Any dealer worth their salt should be able to pop the flywheel off in a few minutes.