250R: Not getting Fire
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I went to start my R today and it didn't want to start it was low on gas so i filled it up... Still it wouldn't start. I took off the fuel line to make sure fuel was running to the carb and sure enough it was. After this i tried kicking it again still nothing. I took the plug out and it was soaked with fuel, i whipped it off and put it back in. Still it would not start. I cleaned it off several times, and still no luck. I am thinking it must be a bad plug or the coil on it is bad. Could the plug just be bad or do u think it's time for a new coil. I took the plug and put the spark plug in it and held it to the motor and still didn't get an ark. Whats the problem??
Thanks
Thanks
#5
#6
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I found the problem this afternoon there was something wrong with the kill switch on it. I don't know what the problem was but i took it off and it runs fine now, but to kill it i have to put the tether cord back in.. No clue what happened to it but i ordered a new one.
Thanks
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
IMLN
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
09-28-2015 03:32 PM
Elkaholic
Land, Trail and Environmental Issues
1
09-06-2015 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)