Honda Discussions about Honda ATVs.

330 owners help please!!!

Old Jul 24, 2004 | 08:04 PM
  #1  
atvbandit's Avatar
Thread Starter
|
Range Rover
Joined: Jun 2004
Posts: 148
Likes: 0
Default 330 owners help please!!!

I would like to know how bad engine vibration is on your bike since mine seems to be excessively bad. this is my first R and have only owned and ridden banshees, and they hardly have any vibration. Is it due to a possible broken counterbalancer shaft (will it even run if it actually is broken), or is it just because it is a 330. Any input appreciated.
 
Reply
Old Jul 25, 2004 | 12:51 AM
  #2  
HA2's Avatar
HA2
Pro Rider
Joined: Jun 2003
Posts: 1,441
Likes: 1
Default 330 owners help please!!!

bump for u.

also, check out www.planetsand.com you'll have to register to see the forums, but i think youll get more experienced responses over there since everyone and there mom has a big bore or stroked honda or yamaha.
 
Reply
Old Jul 26, 2004 | 12:03 PM
  #3  
Mike330R's Avatar
Pro Rider
Joined: Jul 1999
Posts: 715
Likes: 0
Default 330 owners help please!!!

Shouldn't vibrate to much. Check your motor mounts and also the head stay at the top of the motor/frame.
If the CB is broke it will blow up. It could be on it's way out.
 
Reply
Old Jul 26, 2004 | 01:50 PM
  #4  
SickRider's Avatar
Pro Rider
Joined: Jun 2004
Posts: 732
Likes: 0
Default 330 owners help please!!!

Mike330R, nice pics!
 
Reply
Old Jul 26, 2004 | 07:24 PM
  #5  
atvbandit's Avatar
Thread Starter
|
Range Rover
Joined: Jun 2004
Posts: 148
Likes: 0
Default 330 owners help please!!!

Thanks guys, i think i found the problem when i tore it down to inspect. The timing mark between CB gear and crank were off 4 teeth. Also i didn't mention that right front motor mount was broken and also motor missing top/headstay mount. I haven't put it back together yet to know if its fixed but i hope the previous owner did not offset the CB to cure some other problem. I should have gotten a clue that something wasn't right when I literally have to jump on the kickstart to fire it up. Noticed another problem during teardown though which is the clutch basket with the nut tight feels loose (excess side to side play). Checked needle bearings - OK, measured collar- within spec(28mm), my question now is could it be the starter idler gear (very slight play when splined to basket)?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95wolv
Honda
7
Sep 27, 2024 12:00 PM
Joe454
Arctic Cat
7
Nov 20, 2020 01:19 PM
Customer Service #1
Arctic Cat
73
May 15, 2020 08:46 AM
wendal
Kawasaki
9
Oct 31, 2017 03:31 AM
Ahtatu
General Chat
9
Sep 28, 2015 12:14 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:21 AM.