I'm asking this question for my brother. What is a good cheap way to make the 400ex more stable? We have looked for some hubs that set your tires out wider but have not been able to find any. If anyone knows of somewhere let me know, or if you have any other ideas on this. Thanks

 

The RIGHT way to do it is some +2 a-arms and an adjustable axle.....wheel spacers are a band-aid....

 

Ya, but kinda low on funds atm. He is putting in a 440 kit and was just looking to get something to keep him from tipping in tight corners. We are racing in the local circuit and every little bit would help. He plans on getting a better suspension with wider a arms and axle when he has the $$. Thanks for the input!

 

You could check ebay, or rockymountainatv.com sells some of the durablue ones I think. I had some on my mojave and it caused so much bump steer on the front end i had to take them off. The back end would probably be ok for awhile as long as you weren't going to big on doubles or anything or you'll end up with a bent or broken axle.

 

Thanks for the input 96lapiscoupe