Read the forum all the time but seldom post with a problem. IE: HONDA. Took my snow tracks off my 03 Rincon for the summer and went for my first spring ride. Went about 100 yards and the oil/temp light came on. Shut the engine off and back on and the light went out. Drove another 100 yards and the oil/temp light came back on. I know I know your thinking put it back on the truck. Didn’t. Oil and coolant level was up and engine was running normal. Rode it all day and machine ran fine but every time I started it up and went a ways the light came back on. Getting code 11. On my Rubicon code 11 is ECM motor drive circuit. Question. Is this the same on the Rincon. Mechanically the machine has been checked out and is fine. Going to clean and grease the ECM connection and see if moisture is the problem. Hope this takes care of the problem don’t really want to buy new ECM

 

Do you know where to find a list of all the Honda Atv codes.I've been looking for two days and have found nothing yet.Hoope you resolve your problem soon as well .....Thanks..........Wild

 

I'm sure the service manual has them. I was hopeing to run into someone who has both the Rincon and Rubicon manuals. I couldn't find them on line either. Thanks for the respond.