honda whut were u thinking????
#1
honda whut were u thinking????
i am trying to take my front plastics off and i can't get the plug out that connects the lights and also i can't get the simular one unpluged that connects the key, from whut i can see you have to push down three tabs but i can hardly push them down let allown all three at once and pull!!! how are u supose to do it???? lol im shure it will be some easy thing but please help!
also i am taking my a-armas off and i can't get the part that holds the axle and break off, i have the two nuts off and one slid out real easy but the othor one won't!!! ive tryed everything short of cutting it!! any ideas?? thanx !!
also i am taking my a-armas off and i can't get the part that holds the axle and break off, i have the two nuts off and one slid out real easy but the othor one won't!!! ive tryed everything short of cutting it!! any ideas?? thanx !!
#2
honda whut were u thinking????
As far as I can remember, just push the tabs in and pull. Take a small flat head and break em loose a little, then they should flex easier.
And Im not exactly sure where you are talking about on the a-arms, but you pretty much have to have a ball joint seperator to break them loose.
And Im not exactly sure where you are talking about on the a-arms, but you pretty much have to have a ball joint seperator to break them loose.
#4
#5
#6
honda whut were u thinking????
lower a-arms about $36 plus shipping, upper is about $55. I would try rethreading it first. Take one of the nuts to a hardware store so you can find out the thread pattern. Then look at the tap and die section. You need to buy the die that matches the bolt pattern.
/Jon
/Jon
#7
Trending Topics
#8
#9
honda whut were u thinking????
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)