250R Stumped
#41
250R Stumped
Originally posted by: atvbandit
hmmm ..... try this:
1. gap plug @.020 and check for the big fat blue
2. do compression check >>>should be @least 120psi
3. reposition the clip on the needle to the very top notch
4. set airscrews @ 1 and1/2 turns out from fully seated position
5. turn choke off
6. remove air filter box lid and then start her up
hmmm ..... try this:
1. gap plug @.020 and check for the big fat blue
2. do compression check >>>should be @least 120psi
3. reposition the clip on the needle to the very top notch
4. set airscrews @ 1 and1/2 turns out from fully seated position
5. turn choke off
6. remove air filter box lid and then start her up
Stock was 170-190 (the higher compression was on the 250R three wheelers)
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Alex Rodak
Introduce Yourself
0
09-11-2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)