Honda Discussions about Honda ATVs.

front axle bearings

Thread Tools
 
Search this Thread
 
Old Aug 16, 2005 | 09:51 PM
  #1  
angler's Avatar
Thread Starter
|
Pro Rider
20 Year Member
Joined: Mar 2005
Posts: 393
Likes: 0
Default front axle bearings

Where can I find front axle bearings for a 05 Rubicon? I can't find them at Rocky Mountain.
 
Reply
Old Aug 16, 2005 | 10:37 PM
  #2  
Quadfather's Avatar
Pro Rider
Joined: Sep 2001
Posts: 1,116
Likes: 0
Default front axle bearings

try


www.planethonda

or



www.servicehonda.com
 
Reply
Old Aug 16, 2005 | 11:40 PM
  #3  
LittleBill's Avatar
Pro Rider
Joined: May 2004
Posts: 867
Likes: 0
Default front axle bearings

its an 05, i can't possibly see that being a wear item, check warrenty, but i have a feeling its just dirt in the shock towers, if u run through high water and come out does it go away?
 
Reply
Old Aug 17, 2005 | 11:12 AM
  #4  
recon99's Avatar
Extreme Pro Rider
Joined: Aug 2004
Posts: 2,908
Likes: 0
Default front axle bearings

I agree front axle bearings should last at least 5 years on a utility quad unless the seals went bad and mud got in there, in which case it should be covered by the warranty if it hasn't expired yet.
 
Reply
Old Aug 17, 2005 | 11:31 PM
  #5  
angler's Avatar
Thread Starter
|
Pro Rider
20 Year Member
Joined: Mar 2005
Posts: 393
Likes: 0
Default front axle bearings

I am not sure if its the bearing but it is making a squeaking noise where the boot goes into the gearbox. It's not real loud but you can hear it. The only reason I'm worried about is because I am going to Utah September 2 and do not want to break down on the trail. That why I think I am going to bring a bearing with me so if I do break down I can fix it.
 
Reply
Old Aug 18, 2005 | 09:04 AM
  #6  
recon99's Avatar
Extreme Pro Rider
Joined: Aug 2004
Posts: 2,908
Likes: 0
Default front axle bearings

If it was the bearing the wheel would feel a little loose and rattle if you have the front end lifted up and you shake the wheel. If it's squeaking you probably just need to grease the seals around the boot.
 
Reply
Old Aug 18, 2005 | 04:10 PM
  #7  
angler's Avatar
Thread Starter
|
Pro Rider
20 Year Member
Joined: Mar 2005
Posts: 393
Likes: 0
Default front axle bearings

I'm sorry I was talking about the wrong thing. The differential bearing is squeaking.
 
Reply
Old Aug 18, 2005 | 06:44 PM
  #8  
recon99's Avatar
Extreme Pro Rider
Joined: Aug 2004
Posts: 2,908
Likes: 0
Default front axle bearings

I never heard of a differential bearing wearing out since there's not much stress on them. If it's squeaking it's probably just that the seals are dry and need greased. If you can't get in to grease them try wd-40 instead.
 
Reply
Old Aug 18, 2005 | 11:24 PM
  #9  
angler's Avatar
Thread Starter
|
Pro Rider
20 Year Member
Joined: Mar 2005
Posts: 393
Likes: 0
Default front axle bearings

Do you have to tear it down to grease or spray it? I don't have much time right now.
 
Reply
Old Aug 19, 2005 | 11:04 AM
  #10  
action450s's Avatar
Pro Rider
Joined: Sep 2002
Posts: 1,205
Likes: 0
From: NL
Default front axle bearings

No just spray some aerosol lubricant in there to stop the squeek. Its not a problem with regards to breaking down, just an annoyance.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ean
Yamaha
10
Dec 19, 2022 08:48 AM
JackTheKing
General Chat
40
Jul 14, 2015 09:09 PM
clsharky
Kids Quads
8
Jul 13, 2015 02:07 PM
tporath
CAN-AM (BRP)
0
Jul 11, 2015 12:31 PM
Rider252
Chinese Quads
0
Jul 6, 2015 03:37 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:01 AM.