400ex blown head gasket
#1
400ex blown head gasket
well it happend, today on my last run in from the dunes i heard a noise that didnt sound good and lo and behold when i got home and looked at it i blew my head gasket on my 440. i know everyone is gonna say i shoulda bought the bigger head studs but, i didn't[img]i/expressions/face-icon-small-disgusted.gif[/img] so now i get to tear it all back down again and start all over, i am going to buy the bigger head studs this time, this is where you all come in, i need to know who makes the best ones four my bike.
Thanks Wreckless
Thanks Wreckless
#3
#4
400ex blown head gasket
if ur still lookin for an answer im thinkin i got somthing from Baldwin motorsports, i cant remember for sure but if u need to know i can ask my sponsor cause he built my motor and i didnt ask very many Q's he just told me the main things like Ross high comp. piston,hot cam, port and polish etc., if u need to hit me back
#5
400ex blown head gasket
Originally posted by: Tator397
Hey Man, sorry i can't help you with the 440!! Dude, where in the h#!! did you get your graphics!! im looking for new graphics and plastic. sorry about your 440, i wanna put one in mine when i get back to the states.
Hey Man, sorry i can't help you with the 440!! Dude, where in the h#!! did you get your graphics!! im looking for new graphics and plastic. sorry about your 440, i wanna put one in mine when i get back to the states.
Thanks Wreckless
#6
400ex blown head gasket
If you don't want to tear it back down, and want to run a 440 bore, I highly suggest the PC4000 cylinder from Duncan Racing.......It is billet aluminum, and is made the take the stresses of the 440 with a better stud system that is not attached to a cast cylinder. Check them out.[img]i/expressions/face-icon-small-cool.gif[/img]
#7
05 400ex oil moisture on head
I just bought this 3 days ago and owner had told me it needs choked and about 10 min to warm up. So first time out I forgot to take choke off and it started losing power after a little bit so I stopped and that's when I seen oil on the head so I limped it home and now I'm not sure what my next step is... change oil and filter and watch it?? Or take it in... I mean did my timing get messed up thru this
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)