Honda Discussions about Honda ATVs.

brake job

Thread Tools
 
Search this Thread
 
  #1  
Old 02-21-2006, 10:57 PM
mykool61679's Avatar
Pro Rider
Thread Starter
Join Date: Feb 2006
Posts: 854
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

how hard is it to change the front and rear brakes on a 2005 rancher?2x4
 
  #2  
Old 02-22-2006, 12:39 AM
LittleBill's Avatar
Pro Rider
Join Date: May 2004
Posts: 867
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

depends on what exactly you need to do, do u have brake failure? because there is no way your brakes are gone, unless u rode with them on, and burnt them or water got inside, let me know the problem i can tell you how to fix it. i seem to do it alot anymore
 
  #3  
Old 02-22-2006, 04:44 PM
mykool61679's Avatar
Pro Rider
Thread Starter
Join Date: Feb 2006
Posts: 854
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

it my buddies quad, i think the brakes are gone. we ride alot , and threw mud and sand. but the brake tightener behind the right rear tire are both adjusted all the way. is it possible that they are just dirty? how long does it take to wear out a set?
 
  #4  
Old 02-22-2006, 06:24 PM
LittleBill's Avatar
Pro Rider
Join Date: May 2004
Posts: 867
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

nope its water failure, more then likely, u will need to pull the tire, pull the hubs, check and regrease the seals, clean up the pads and put it all back together
 
  #5  
Old 02-22-2006, 07:04 PM
mykool61679's Avatar
Pro Rider
Thread Starter
Join Date: Feb 2006
Posts: 854
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

there about 1 in half years old.how hard of a job is it? any thing like car brakes?are you sure they dont need changed? how long does a set last?
 
  #6  
Old 02-22-2006, 07:08 PM
LittleBill's Avatar
Pro Rider
Join Date: May 2004
Posts: 867
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

well i have about 3800 miles on mine, and they were only half shot, they are extremely similar to car brakes, the front is like a dual piston drum brake, the rear is very similar to a cable parking brake, pretty easy if you have done drums before
 
  #7  
Old 02-22-2006, 07:10 PM
mykool61679's Avatar
Pro Rider
Thread Starter
Join Date: Feb 2006
Posts: 854
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

what do i need to do?take them apart , clean them up, put back together? any way to keel this from happening again? how come the tightners are as tight as they will go?
 
  #8  
Old 02-22-2006, 08:25 PM
LittleBill's Avatar
Pro Rider
Join Date: May 2004
Posts: 867
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

take them apart clean them up regrease the seals, sand down the pads a bit and get back on the road, adjusters all the way in cus of the water
 
  #9  
Old 02-22-2006, 08:35 PM
mykool61679's Avatar
Pro Rider
Thread Starter
Join Date: Feb 2006
Posts: 854
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

anyway to prevent?
 
  #10  
Old 02-22-2006, 10:15 PM
LittleBill's Avatar
Pro Rider
Join Date: May 2004
Posts: 867
Likes: 0
Received 0 Likes on 0 Posts
Default brake job

grease and inspect seals every oil change, thats about all i can tell ya
 


Quick Reply: brake job



All times are GMT -5. The time now is 01:13 AM.