Honda Discussions about Honda ATVs.

need help after upgrade

Thread Tools
 
Search this Thread
 
  #1  
Old 01-09-2007, 06:31 PM
martymar's Avatar
Weekend Warrior
Thread Starter
Join Date: Nov 2006
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default need help after upgrade

I need some help, I recently installed an HMF balance slip-on, K&N filter kit, and rejetted my carb on my 07 trx450er. Now it cranks way better than stock,no choke, cranks right up. However the problem is, it backfires occasionally on startup, runs smooth and real strong, but if I run through the gears and suddenly stop, it sometimes shuts off. It cranks right back up, but It's agravating having to keep cranking it. Any help would be highly appreciated. Thanks
Marty
 
  #2  
Old 01-10-2007, 06:08 PM
martymar's Avatar
Weekend Warrior
Thread Starter
Join Date: Nov 2006
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default need help after upgrade

Am I the only one here thats ever had this problem? Anyone?
 
  #3  
Old 01-11-2007, 03:51 AM
HR's Avatar
HR
HR is offline
Range Rover
Join Date: Nov 2005
Posts: 156
Likes: 0
Received 0 Likes on 0 Posts
Default need help after upgrade

well i would say you put the wrong jet in. is it poping? or kinda powing? the diferant tons in the backfire will tell you if it's lean or rich. check you plug. see what it's doing.

HR
 
  #4  
Old 01-11-2007, 09:54 AM
reconranger's Avatar
Red Rider
Honda, accept nothing less!
Join Date: Dec 2002
Posts: 12,733
Likes: 0
Received 1 Like on 1 Post
Default need help after upgrade

Spend the money to have it jetted by an experienced professional!!!!

Jetting is more art than science. You can't just buy a jet kit and throw in the jet they recommend and expect it to be perfect, you have to jet it by how it rides, and that takes experience.

To start with, you are way to rich on the bottom seeing it starts without any choke (I don't think I have ever seen a 450 that will cold start without some choke)! You top end jetting may be off too. Be sure it isn't lean on top, because it will run hot and that can damage the engine.
 
  #5  
Old 01-11-2007, 01:05 PM
bombrider04's Avatar
Pro Rider
Join Date: May 2006
Posts: 2,060
Likes: 0
Received 0 Likes on 0 Posts
Default need help after upgrade

and one other thing get rid of the k&n before you ruin your engine and won't start at all, replace it with stock for now or a foam filter.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jmuddin284
Polaris
7
06-28-2017 04:59 PM
jankerstien
Kawasaki
1
09-21-2015 03:09 AM
Bonzhonda300ex
General Chat
12
09-17-2015 10:44 AM
Brandon400
Kawasaki
0
09-05-2015 08:44 PM
XxS0ccerstarxX
Honda
3
08-27-2015 02:31 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: need help after upgrade



All times are GMT -5. The time now is 06:13 AM.