I had the chain come apart on me and it ripped a hole in the case where the left cover and the case meet. I need to try and repair this hole anyone had any expeience with this. What is best to use jb weld or what?? thanks for the help. Scott

 

Well to do it right it's not cheap , but there are machine shop's now that can weld with aluminum ; i saw a show on TNN Motor Sports where they used speacial aluminum welding rod's to weld cracked head's and aluminum engine block's ! I had to repair the alminum mounting brace that hold's the power steering pump in place ; i was working on my nefew's lawnmower at the time. And i let him put a waterpump on my truck for payment of me doing a valve job on his mower , he tighted a few bolt's before getting all the bolt's started ; when he got the last bolt he got it in bind breaking the bolt hole that went through the water pump ! The cost for this simple mistake was $50.00 just to weld this small peice with the bolt hole to the almuinum brace ! It didn't take a few second's to weld the tab back on the brace , but the minimum charge was $50.00 wheather it took 1 hour or 1 second ; sorry for the long reply ; but it can be mended with this type welder and it will break in a different place before it break's in the spot that was welded ! williebee