bearing carrier for 400?
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
my 400 needs a new bearing carrier..ive been lookign around ebay and they've got lonestar, RAD , and some no-name one. they are all dual row, what would you guys reccomend? i've got the stock axle..i just think if i have to put something on it i might as well make it stronger than before. thanks in advance
#3
#4
#5
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
that depends, if you change your bearings like you should, you will have no problems with a stock carrier. I mean, you can get a stock carrier on ebay for less than 40 bucks. I only paid 20 for mine. Just remember that a carrier for a 250r is the same as the 400ex
#6
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
i was thinkin about the RAD one because it looks like it has the grease zerk on the left side...i think with the places i ride i could get more life out of bearings if i greased them after every ride rather than the sealed setup the stock one has. I've also heard that changing bearings is hard..and i dont have any of the tools to do it..
Thread
Thread Starter
Forum
Replies
Last Post
exmotocrosser
Polaris
10
09-13-2019 06:12 AM
Elkaholic
Land, Trail and Environmental Issues
1
09-06-2015 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)