..ok i just push the starter button on my 300,1994..the nuetral light just plinks starter will not ingage,i cross it over at silanoid starts fine,or kick it,i went just below the stater button,splced the wires touched them together still nothing,
question where would my trounle be located???thanks for any info

 

Starter solenoid

 

if you say the neutral light blinks, I would suspect either the solenoid, or the diode.
On those machines also, there was trouble with them holding mud and moisture in the battery box area, and wires would corrode and break. Have a good look at the wiring in the battery box area.