installing new brakes
#2
installing new brakes
its not rocket science but a few pointers are helpful.
1. notice how the retractor springs are placed. they have a long end and a short end.
2. notice which end of the shoes go where. the ends are different.
3. if there is a ~30mm nut involved on the rear axel you will need an impact wrench for removal
4. clean & lube the adjusters and set them out as far as possible and still get the drum on.
i have replaced them on a rancher but not on a recon but i suppose they are similiar.
1. notice how the retractor springs are placed. they have a long end and a short end.
2. notice which end of the shoes go where. the ends are different.
3. if there is a ~30mm nut involved on the rear axel you will need an impact wrench for removal
4. clean & lube the adjusters and set them out as far as possible and still get the drum on.
i have replaced them on a rancher but not on a recon but i suppose they are similiar.
#3
Thread
Thread Starter
Forum
Replies
Last Post
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
0
09-07-2015 03:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)