Honda Discussions about Honda ATVs.

Rubicon

Thread Tools
 
Search this Thread
 
  #11  
Old 01-26-2001 | 11:52 AM
EZErriicc's Avatar
Trailblazer
Joined: Aug 2000
Posts: 38
Likes: 0
Default

The rubicon is better in every way....You won't be dissapointed I guarantee that...As far as the shocks being too stiff, i've never heard or noticed this on my rubicon...All i know is that the ride on the rubicon is much smoother, while at the same time there is almost no body roll in the corners...They dialed in the suspension perfectly as far as i'm concerned....and when your looking through the archives, look for posts by TxDoc2.....not Texdoc2...
 
  #12  
Old 01-26-2001 | 06:58 PM
snowshark's Avatar
Pro Rider
Joined: Feb 2000
Posts: 2,123
Likes: 0
Default

I own a Rancher & the ride is very good. The ride on the Rubicon is BETTER. Also, has more power, better tranny, 3 headlights, dual shocks on rear, more ground clearance. The Rubicon is an excellent machine, you will not be disappointed if you get one. First you need to try a test ride & check it out!!
 
  #13  
Old 01-26-2001 | 07:36 PM
jefffoxsr's Avatar
Pro Rider
Joined: Oct 2000
Posts: 1,265
Likes: 0
Default

Honda just sent me the 2001 Utility quad brochure. The Ruby is not in it. The ground clearance for the rancher says 9.7", and the foreman says 7.7". Is the Ruby also 7.7"? If not, then what is it's Honda rated clearance since no mention of the Ruby is in my brochure? Thanks.
 
  #14  
Old 01-27-2001 | 10:43 PM
shumdit's Avatar
Pro Rider
Joined: Dec 2000
Posts: 230
Likes: 0
Default

JEFF- the Rubicon has it's own brochure. The listed ground clearance is 10.0". They also have not raised the overall height of the machine over the Foreman 450 to achieve this. The combination of the new valvetrain system and dry sump lubrication allowed them to lower the engine height. They applied the lowering of the engine to raise the ground clearance while maintaining the same overall height and center of gravity.
 
  #15  
Old 01-27-2001 | 11:17 PM
jefffoxsr's Avatar
Pro Rider
Joined: Oct 2000
Posts: 1,265
Likes: 0
Default

Great. Thanks. I'll try to get one from Honda. 10" is super.
 
  #16  
Old 01-28-2001 | 04:36 AM
jscyoung's Avatar
Pro Rider
Joined: Feb 2000
Posts: 332
Likes: 0
Default

shumdit, what is the ground clearance of the Rubicon under the rear gearcase? This is where it would be the lowest. With a solid axle and 25" tires, I can't see how it can be much more than about7-8".
 
  #17  
Old 01-28-2001 | 05:20 PM
shumdit's Avatar
Pro Rider
Joined: Dec 2000
Posts: 230
Likes: 0
Default

The clearance under the axle is not listed and I have not measured it. In my experience the rear axle clearance will not cause you to get stuck on a 4x4. The floorboard area is where you will get hung up. On a 2wd machine it is my experience that the rear axle clearance is very important to overall traction ability of a machine.
 
  #18  
Old 01-28-2001 | 06:36 PM
fisherman's Avatar
Weekend Warrior
Joined: Jan 2001
Posts: 5
Likes: 0
Default

anyone tried different tires on the rubicon, and
what about steering, can that be improved with a tire change?
 
  #19  
Old 01-28-2001 | 11:38 PM
GreenRuby's Avatar
Trailblazer
Joined: Dec 2000
Posts: 57
Likes: 0
Default

A buddy of mine stopped by last night as I was about to go out for a ride. He is a non-ATVer as are most of my friends. So I asked if he wanted to go along thinking that I would just put around in the woods and enjoy the scenery.

I'm 230 and he is 220. With 450 pounds on the machine I was able to pull away from a Foreman S and an ES. This was on the flats and through some tight twisty wooded trails.

I know this sounds like bragging but that isn't how I meant it. I was simply amazed at the power and composure it showed on the trails. I am more and more impressed with this thing every time I take it out.
 
  #20  
Old 01-29-2001 | 06:15 PM
Rubidude's Avatar
Pro Rider
Joined: Jul 2000
Posts: 443
Likes: 0
Default

I noticed a big difference in steering effort when I put on my Mudrunners. It definitely improved. Mudrunners are designed to do that though.
 


Quick Reply: Rubicon



All times are GMT -5. The time now is 02:10 AM.