300ex Wiring Question
#1
Whats the green wire under the hood..
My quad was (pretty sloppily) rewired by the previous owner.
I had to take my plastics off, put longer wires on, do some soldering and taping, to get my headlights all squared away,
I found low beam, I found high beam.. every thing else is hooked uo (reverse light / neutral light / key switch)
But there is an exposed green wire that wasn't hooked to anything, and everything
works with it not hooked up... What is this wire?
I clipped it clean so it wouldn't short on anything.
My quad was (pretty sloppily) rewired by the previous owner.
I had to take my plastics off, put longer wires on, do some soldering and taping, to get my headlights all squared away,
I found low beam, I found high beam.. every thing else is hooked uo (reverse light / neutral light / key switch)
But there is an exposed green wire that wasn't hooked to anything, and everything
works with it not hooked up... What is this wire?
I clipped it clean so it wouldn't short on anything.
#3
If it works, I would be tempted to leave er be. But it is probably a ground wire. Take a reading on it with the bike running, lights on/off etc. If there's no power, ever, attach it to the frame somewhere. It's a ground.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




