I HAVE A 05 RANCHER 350 4X4 THE DISPLAY WENT FROM MPH TO KILO,THE MILES REED 999999 AND I HAVE NO GEAR READ OUT ON THE DISPLAY . I HAVE TALKED WITH JUST ABOUT EVERY HONDA SHOP TEC AROUND AND THEN SOME .NO ONE CAN FIGURE THIS OUT.WHATS UP WITH THAT. AND THEY SAY BUY FOREIGN RIGHT [img]i/expressions/face-icon-small-confused.gif[/img]

 

hondas are made in the USA, down south. people have had the same problem before. hondamech will probably chime in

 

Over the years I've read on the forums where people want to know how to change there display from MPH to KM (or the other way) and I have no idea how to do it .. I've had old (changed under warranty) displays apart as far as they will come apart and there's no magic button that I can find do switch them .. It must be a power glitch ..

 

You don't say if it is manual change or electric , and are you US, Canada or where?.. if it is still changing then I would simply forget about it - but if it won't change gear then you are gonna have to buy a new display unit. You could try disconnecting and cleaning the plug - but I doubt it's gonna work

 

i have a froend whos an electronic engineer, hes looked at a display and thiks all th information is saved on a flash/harddrive. if there is a power glich then all your information is lost, 99999 is probly a safe or defalt mode.

this probly meens your out of luck, and i doubt there is a way to reset it. the power regulator in the display is probly damaged, thats why you had the problem in the first place. sorry dude