It's an old machine but I believe that nobody has removed the restrictors on it so if anyone could give me details on where they are and what tools are necessary to remove them, thanks! Also, a basic procedure would be very helpful. Thank you all for the help!!

 

honda mech can prob solve this for shure ...but i looked at some blow aparts here
http://www.powersports...om/...../Honda.aspx

</a>
and think the cap with the small hole on the air box lid should be removed to let it get more air and fuel ....some one correct me if im wrong ...the carb may need adjusting as well,and there is a screw and jamnut on the throttle to prevent full throttle...remove this as well

 

Thanks for the response man, will look into all that stuff and get back to you.

 

They had a (if I remember right) large plastic washer with a small hole in it on the airbox... They didn't have the washer in the exhaust like some Honda models..

================================================== ==================================

 

same part i was talking about (thanx honda mechanic)a simple restrictor plate