I want to replace the rocker arms and after reading about the pins in the Clymer, I am wondering just how hard it is to pull them out. If I file the notch in them that they are talking about, can I pull them with vise grips and a hammer?

 

i can do it in about 1 minute, you need to take a pair of visegrips and pull the pins, take a 90 degree pick or an allen wrench and slied the dowell out the the rockers just lift out

 

Ok thanks. I hope the pins come out as easy as you say. I've read where they can be in there extremely tight.

 

they are extremely tight if you are stout ou can do it, if not just heat i up witha torch be careful though, have a good one