My father-in-law recently purchased a 1993 Honda 200E ATC. The foot brake is loose, and I've noticed that the rear brake 'arm' on the rear axle housing is frozen. Now I took off the right tire, the first 'dust cover', and both axle blots, but I cannot seem to get the darn brake drum off for the life of me!!!! There's a washer, as well as a round 'tube of some sort that I got off as well, cleaned up the area between the drum and axle, but cannot see a 'spring clip' or anything of any sorts that is keeping the drum on!!!!
Can anyone please help!!!!!????! Is there a certain tool I need to get what needs to come off for the brake drum to get removed?( I noticed that there's a washer type of thing that's inbetween the drum and axle, has a few holes in it, but doesn't expand or contract to get it off!).
Any ideas would greatly help and be appreciated!!
Can email me at bdzajackowski@aol.com

 

If the rear brake arm is seized you will have trouble getting the drum off , you may have to tap the brake arm back with a hammer to release any pressure off the shoes/drum ..

I also will email you the brake section from the 1982-83 ATC200E PDF shop manual ..

 

I got them off today!!!! Had to actually heat the heck out of them, then hammer the living s*#t out of the axle ( from right to left ) it came off after about 4 tries and 2 1/2 hrs of work!!!
Thanks to everyone with all the help!!!
You guys, as well as this site, are awesome!!!

 

hi i have the same problem and i was wondering if u could email me the shop manule