I have a 2009 Honda Rancher AT W/Power steering. Under the seat on one side, there is an unused electrical connector that has a cap on it and is taped down. There are 4 wires going to it. Does anyone know what this is for?

 

That would be the DLC connector for the HDS tester ..

================================================== =========================

 

Thanks, that is exactly what I wanted. The drawing is nice to have also. I was actually hoping it was something I could tap into for winch. Someone told me another wire that I will probably end up using. Want to make it a good clean install. I was curious about the connector thinking it might have been for a accessory.

Thanks Again

 

If you don't have the (optional) accessory plug installed the accessory plug wire is at the front right side , you can see it buttoned to the radiator cover inside the front wheel well..

 

Put the Moose bumpers on tonight, have the Warn XT25 winches on order. Also adding CV Guards. Hopefully winch install goes smooth.