howdy im new here but not to vehicles atv yes i bought a 1986 trx200sx yesterday for 75 bucks motor has great compression everything looks good only bad thing was it needed total rewire as someone decidedx to yank apart all the wires so i downloaded a 200sx wiring diagram and had all wires right when to start with pull start i am not running electric starter as now battery mount was available and dont want to mess with wiring that in i didnt hook up the statrter button or headlight tail lights no there but there is no spark so i got my ohm meter out checked coil coil was goo on the plug wires end but cant seem to get a reading from the spark plug end but plug is good as i can get reading from both ends of plug with ohm meter so it's getting current threw but i went to test cdi box not getting any ohms threw it so i trash the cdi box and now trying to hot wire it where the cdi box used to be any help would be aprriciated or a internal diagram of the cdi box would help also and i yanked carb took it apart nd soaked it in gas over night and brush cleaned the insde this morning and got all the gunk out .