I want them for my 99 Recon. The only place I have seen them in Motion Pro and they are $42 a set ! I can't even find them on a Honda OEM site.

 

I made mine!! Get you an 41mm socket or convert to inches and cut the socket top off an get apiece of pipe bout 12inches long and weld the top back on an you will have an deep well socket for an air gun....!

 

Rocky Mountain ATV

 

Rocky Mtn doesn't sell a 41mm. They sell every size but that one. I talked to them on the phone. And the socket idea would work but only for the outer nut. I'd also need an open end wrench for the inner nut. I think I'll bite the bullet and just order a set.

 

cardboard cut out transferd to a peice of steel ... easy

 

Made some 41mm axle nut wrenches for the Recon. I almost bought a set for $45 but just before I clicked on "confirm order" I decided to make them on our wire EDM machine. Took about an hour. After writing the CNC program, I cut the shape out of 1/2" thick hardened tool steel, then I turned it on edge and sliced it in half. Yes, hardened tool steel. HA. They have a 2" offset for a 1/2" drive torque wrench. Nice huh?

 

Nice Job...The socket thing does work been using my set for 25 years on 300 fourtrax...I use an air gun to zip the outer nut off then zip the inner nut off...But your will work, until they are seized on then the air gun comes in handy....I was just giving you my ideal.....But your wrenches looks good just like the factory one...which I have also...Just the socket set works better to me on an seized nut....Good luck and keep up the good work..