Hello All,
I was just hoping someone can help with My Rubicon, It had set without running for about 6 Months, when I started it back up, It had to have the enrichener on, or it would die, I pulled apart the carb and cleaned it up, it runs really good now, but I am having trouble getting the air box back on with all the rubber boots and stuff, I am simply out of room, how does everyone else do this, it came off fine with a little muscle, but putting it back together I want to be a bit more gentle.

Thanks all in advance,

Rick

 

sometime there are studborn ..make sure the elbow rubber boot on carb and box is turn correct..think should have an tab at top on boot thats will line up with tab on box..sometimes I get it turned an will make longer just reinspect boot tap to box an see if that the problem..good luck

 

Thanks Pappa Hogg Scoot,
When you install them, do you have the rubber boot between the air cleaner box and carb installed onto the carb or the air box before installing?

Thanks for your help

Rick