Honda rancher electric shift problem

Reply Subscribe

Thread Tools

Search this Thread

May 21, 2018 | 06:07 PM

stephenwillis

Thread Starter

Trailblazer

Joined: Mar 2018

Posts: 28

Likes: 0

Honda rancher electric shift problem

I have a 2003 Honda rancher ES and for some reason it keeps blowing the electric shift fuse I have replaced five probably already within 20 minutes. If you have any idea what’s wrong please help me out thanks

May 22, 2018 | 02:23 AM

merryman

Elite Pro Rider

Joined: Oct 2013

Posts: 7,486

Likes: 387

From: Lancaster England

I think the ES fuse is connected directly to the shift motor, (could be wrong). So unplug the shift motor and try the shift buttons, if it still blows, it is a wiring or ECU fault. If it doesn't blow (it will fault code) take the motor to pieces and see if anything is wrong inside it. The motors are swine to get back together.

May 28, 2018 | 10:27 AM

stephenwillis

Thread Starter

Trailblazer

Joined: Mar 2018

Posts: 28

Likes: 0

The fuses actually supposed to be at 10 AM but if I put a 15 minute it don’t blow should I leave a 15 minute or what?

May 29, 2018 | 01:57 AM

merryman

Elite Pro Rider

Joined: Oct 2013

Posts: 7,486

Likes: 387

From: Lancaster England

Fuses are rated in amps not minutes, but there is something wrong if it blows the correct fuse. Are you sure it should be 10 amps, check what it says on the fuse box lid.

May 29, 2018 | 06:31 AM

stephenwillis

Thread Starter

Trailblazer

Joined: Mar 2018

Posts: 28

Likes: 0

It’s a 10 amp Not a minute , Sorry about that. Thanks for your help

May 30, 2018 | 12:47 AM

merryman

Elite Pro Rider

Joined: Oct 2013

Posts: 7,486

Likes: 387

From: Lancaster England

No it isn't. I thought there was something wrong, so checked a 350ES we have in. The ES fuse is the one marked Motor and is 30amp, so which fuse is actually blowing?