I am going to be doing a front end conversion on my wifes 300ex, I am changing it to 400ex a-arms and shocks with the shock mount kit from ATV Racing. My question is will the 300ex brake lines reach now that I am basically gaining 2 inches or am I going to have to get new brake lines?

 

i would call the place you got the kit from and ask them.

 

the lines should reach no problem

 

they reach fine

check out my site for all the INFO

i did this a few months ago

pics of the cutting process welding and all that shiznit

http://www.envy.nu/xc330ex/

 

Oh Man thanks for the info on your website that HELPS out a TON!!!!!
I might be emailing you about this if thats alright? About how long did it take to complete?

 

the e-mail address is aaronllmm@home.com i don't know what my site lists..

but go for it, i'll answer any question you have and have more pictures.


took about an 2 hours to get the old mount out, and prep the frame for welding..another 2 hours to get it lined up and welded in..then cooled over night to set..and put it back together..