We just changed the plates and springs in the clutch on the 3 wheeler last week, and now when the clutch is pulled in and in first gear, the machine wants to move foward. The clutch cable is adjusted properly, so what else did we forget to check while we had it apart. What can we do to remedy this? Please help, going through withdrawel from not riding it......

th

 

we have an atc250r and a trx250r and they both do that slightly.

 

did you remember to soak your clutches in oil?
otherwise they may stick.

 

Are the fingers,that contact the tabs on the outside of the fiber plates,have grooves in them.Grooves will make them stick together.

'88 250R many extras

 

My 350X does that a little bit. I am sure it is because of the grooves worn into the Basket. I filed them down a little like the clutch kit recommended, but I am thinking I need a new basket. They are pretty deep grooves.

 

Hey five o your on the right track make shure the plates are fine and be thankfull you dont have a junk raptor clutch .have a good day and say hi to phil .

 

ricky racer sucks