The right front brake on my Rubicon has recently started grabbing when applying the brakes. The bike has about 300 miles on it and has never been in deep enough water to get into the brakes. I pulled the drum off and nothing appeared to be wrong. I used some brake cleaner to remove the dust however it still does it, any ideas what to check? Thanks.

 

MICHAEL2,

HAVE YOU TRIED TO ADJUST BOTH FRONT BRAKES UP TIGHT AND THEN JUST OFF ENOUGH TO FREE UP WHEELS. MAYBE THE RIGHT IS ADJUSTED TOO TIGHT. YOU HAVE TWO ADJUSTERS PER SIDE ,ONE FOR EACH CYLINDER, SO YOU WOULD ADJUST 4 ADJUSTERS. TRY'IN TO HELP