help 300ex brakes??????????????????????????????!!!!!!!!!!!!!! !!!!
#1
I BAUGHT A 300EX AND I KNOW NOTHING ABOUT IT. I BAUGHT IT FOR $200 IT HAD BAD BEARINGS SHOCKS BUT GOOD FRAME, MOTOR AND PLASTICS I PUT ALL RACING STUFF ON IT I HAVE NEVER HAD REAR BRAKES ON IT that worked. I FINALLY PURCHASED SOME PARTS AND MY E-BRAKE BLOCK OFF PLATE LEAKS UNDER PREASURE. DOES IT NEED A GASKET? WHAT SHOULD I DO ???
#2
#4
You can get the seals from your dealer. They are not expensive.
If your dealer doesn't have the embry cloth,..check at a local auto parts house. They will have it.
It's not hard to do at all. Be sure to get some new brake fluid while your there. Clean your system out with new brake fluid. Just pump it through a few times before bleeding it. Don't use any type of cleaning chemicals to clean it or you will cause deteoriation and swelling of your new seals. Not to mention contamination of your new brake fluid.
KNOWSALOT
If your dealer doesn't have the embry cloth,..check at a local auto parts house. They will have it.
It's not hard to do at all. Be sure to get some new brake fluid while your there. Clean your system out with new brake fluid. Just pump it through a few times before bleeding it. Don't use any type of cleaning chemicals to clean it or you will cause deteoriation and swelling of your new seals. Not to mention contamination of your new brake fluid.
KNOWSALOT
Thread
Thread Starter
Forum
Replies
Last Post
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
0
09-07-2015 03:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)