250r gearing
#1
What do you think the best gearing for hill climbing. I climb sand mountain in high 3rd and sometimes 4th . What are you guys running for gearing? What do you think the best gearing would be to go up faster for know i'm running stock 13 39 gearing. I want to beable to pull a higher gear to go faster. What do you think????
#2
#3
I went to a 12 tooth counter shaft gear and liked the power response, but the way it wore the chain out faster really sucked.
Try a larger rear sprocket, like a 42 tooth. That would be equal to going down to a 12 in the front. 1 front=3 rear generally.
This should let you pull the same hills a gear higher and at higher speed. You will lose some on the top-end speed but so what? How often are you riding there?
Try a larger rear sprocket, like a 42 tooth. That would be equal to going down to a 12 in the front. 1 front=3 rear generally.
This should let you pull the same hills a gear higher and at higher speed. You will lose some on the top-end speed but so what? How often are you riding there?
#4
I go there about every 3 weeks in the spring and in the fall. I try to stay away from the dunes in the summer because it is to hot. I would change the gearing for what type of ridding i would do. I think that i'm going to go with the 42 rear. I don't want to wear my chain to much. Thanks. Where would i order a 42 rear though i'm having a tough time finding bigger rear sprokets. What kind like jt, renthal, sunstar,etc.
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Alex Rodak
Introduce Yourself
0
09-11-2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)