i got a dead 88 200sx sitting in the back yard all beat to hell but if it had all the wheels and brakes it would run like a top


exlax250x 87 fast as hell slightly modifyed:-)

 

my 200 didnd slide i had dick cepic spider tracks on it it was sweet

 

Any one in the nova scotia area with a 200sx for sale let me know you can e-mail me at em1n3m33333@aol.com

 

I know some one who had an sx he beat it to crap everythink brke but the engine

 

well guys this is proof of how reliable these little quads are! just this afternoon, after i got out of school i went home, fixed my exhaust on my truck then went riding with my friend and his 99 300EX, well we had been riding for a while and were heading for some rock piles to climb. We were going down the road at about 45 mph, when all of a sudden BAM the back brake just locks up on me, so i was about 3 miles from home, my friend hauls me back on the 300EX and we get my 75 ford, with a new paint job and one sweet flatbed that i made on. hauled it backed called the local honda dealer and asked him the problem, he said that water probably got in the brake and unglued the pad from the shoe, he was right, we took the tire off and brake cover, it took a little bit to get the shell off inside, but when we took it off we found one charred brake pad and jeez was that thing warm, it got so hot it made the metal of the brake shoe turn purple and other colors! anyway my friend had a extra brake at his home since he had an old 200SX also, we tried to put that thing on but the sutbborn shell wont go on that SOB! got to call the local dealer and see what is up! well if anyone has any suggestion please share! and that brake we took off was the factory brake shoe and pad, that is how good those little bugers are! thanks`1

Ranger 86 200SX w/ a crippled rearend right now

 

rember to adjust the brake back down since you have a "newer" shoe... other than that it should work. I still have the stock brakes too, and i run a tank of gas threw it every month since it was new
Joe

 

Another question for you all, does your SX have a nasty engine knock when you give it gas when cold? Mine knocks like a diesel for the first 5 min of running.. I HOPE it is pistion slop and not a rod! It has done it for the last 3 years
Joe

 

never done it to me, sorry!

 

Mine sometimes after you turn it off winds down. I think it is the starter. This winter i am going to re tape the rear axle bolt holes and get new bearings in the swing arm. I just replaced the fronts and back. I might need a new front sprocket and then it will be ready for summer! I have bandit xcs on the back and fast treckers on the front. I am thinking about getting +2 front a-arms and longer shocks and axle. Can you get that for this or not?

 

I had a 86' 200sx and sold it to buy a Recon,wish i would have kept it for my daughter,those machines are indistructable !!! I have seen them have the living **** run out of them and they just wont die !