300EX blues!
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I have solved the problem to the EX reverse blues. When putting it in reverse it sometimes gets cranky and sometimes it goes in without a hitch. so here is what to do. When it gets cranky here are the steps.
1.warm up machine
2.push reverse mounted button
3.pull in clutch
4.pull up reverse lever
5.if does not pull up keep pulling and just release the clutch a little and it will pull up every time.[img]i/expressions/face-icon-small-smile.gif[/img]
1.warm up machine
2.push reverse mounted button
3.pull in clutch
4.pull up reverse lever
5.if does not pull up keep pulling and just release the clutch a little and it will pull up every time.[img]i/expressions/face-icon-small-smile.gif[/img]
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I remember when I had my 300EX and it was cold it would always die when reverse was tried.
So I got to wear it would just be pushed off the trailer or I would make sure it was pointed the right way so reverse was not needed.
Now after fully heated, I was an expert at the 300EX reverse and it becomes second nature.
Also make sure the cables are adjusted correctly.
Chet[img]i/expressions/face-icon-small-wink.gif[/img]
So I got to wear it would just be pushed off the trailer or I would make sure it was pointed the right way so reverse was not needed.
Now after fully heated, I was an expert at the 300EX reverse and it becomes second nature.
Also make sure the cables are adjusted correctly.
Chet[img]i/expressions/face-icon-small-wink.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
OutRacing
Technical and How-To Articles
5
09-03-2015 07:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)