2000 2001 honda 400ex
Nov 3, 2012 | 02:26 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Nov 2012
Posts: 2
Likes: 0
From: El dorado hills, CA
2000 2001 honda 400ex
Im new to this forum. Every time I search for info on my rigs I get google results from this site. So I registered.
I recently purchased a 2000 and 2001 Honda 400 ex after a buddy with 2006 400ex convinced me to get one too.
2000 400 ex 440 big bore, stage 1 cam, exhaust and a bunch of other aftermarket stuff that was bro ably the result of the previous owners breaking stuff. 8 need to replace head gasket. Hope fully just the gasket.
2001 400ex runs very good, stage 1 cam and upgraded muffler. Needs rear carrier and bearings. Found out the rear sprocket hub seal surface was tore up too from loosing the bearing on driver side. So I ordered a used 2007 rear axle from eBay. I hope to get everything together to get out on these things.
I recently purchased a 2000 and 2001 Honda 400 ex after a buddy with 2006 400ex convinced me to get one too.
2000 400 ex 440 big bore, stage 1 cam, exhaust and a bunch of other aftermarket stuff that was bro ably the result of the previous owners breaking stuff. 8 need to replace head gasket. Hope fully just the gasket.
2001 400ex runs very good, stage 1 cam and upgraded muffler. Needs rear carrier and bearings. Found out the rear sprocket hub seal surface was tore up too from loosing the bearing on driver side. So I ordered a used 2007 rear axle from eBay. I hope to get everything together to get out on these things.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)