Burning wire while starting
Sep 17, 2018 | 06:17 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Sep 2018
Posts: 2
Likes: 0
Burning wire while starting
Hello all,
I have a 2002 Eton Yukon YXL 150. I can shift from F,N,R and the correct light turns on. The brake light works. When I went to start the quad the light jumped form neutral to forward and a wire heated up and melted the insulation. The wire runs from a 4 pin connector on the left to in front of the shift lever on the right. I would like to fix the quad so I may donate it to a Horse rescue place where I volunteer. Any ideas would be apprciated.
Thank you,
Ken
I have a 2002 Eton Yukon YXL 150. I can shift from F,N,R and the correct light turns on. The brake light works. When I went to start the quad the light jumped form neutral to forward and a wire heated up and melted the insulation. The wire runs from a 4 pin connector on the left to in front of the shift lever on the right. I would like to fix the quad so I may donate it to a Horse rescue place where I volunteer. Any ideas would be apprciated.
Thank you,
Ken
Thread
Thread Starter
Forum
Replies
Last Post
Mark0524
1) Engine problems..
3
Mar 2, 2015 02:59 AM
Raptorboy4life
Yamaha
46
Mar 2, 2004 02:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)