anything to say bad about the P650?
#11
anything to say bad about the P650?
i have had mine for almost a year, no major problems that were the machines cause (i gotta lay off the caffine, to many broken bolts lol) had the belt adjusted soon after my first service, and put the black spring in and it is still tight (650 miles later) my only complaint is the rear brake i've tried to adjust it but when im in 2wd it doesnt stop the quad right away, it slows it down a little then 10ft. later it completely locks the rear wheels up in 4wd it is fine. i would definetely buy it again
#12
#13
anything to say bad about the P650?
so how much does the EPI spring kit cost?
so you guys for the most part would reccomend the P650? it seems as the obvious choice for me and thanks for all your posts, i just want to get an idea on what to expect when i finally get mine... im so excited and wanted to make sure it wasnt a mistake to get one, im hoping i wont have to buy another ATV after this one...and how weak is the plastic, are we talkin like dollar store plates? or tupperware..LOL...
and if anything else can you guys please instant message me on my AOL screenname at tim2k214
so you guys for the most part would reccomend the P650? it seems as the obvious choice for me and thanks for all your posts, i just want to get an idea on what to expect when i finally get mine... im so excited and wanted to make sure it wasnt a mistake to get one, im hoping i wont have to buy another ATV after this one...and how weak is the plastic, are we talkin like dollar store plates? or tupperware..LOL...
and if anything else can you guys please instant message me on my AOL screenname at tim2k214
#15
#16
anything to say bad about the P650?
Prairie Power,
The EPI black spring is right around $20. You don't need the whole "kit", just get the black spring. I installed mine at 285 miles and now have 1200 miles on my '03 Prairie and the belt is still in good shape and well w/in spec as far as the deflection goes. I did not install the spring myself, but it can easily be done if you follow the instructions on NYROC's site. Good luck w/ your purchase![img]i/expressions/face-icon-small-smile.gif[/img]
The EPI black spring is right around $20. You don't need the whole "kit", just get the black spring. I installed mine at 285 miles and now have 1200 miles on my '03 Prairie and the belt is still in good shape and well w/in spec as far as the deflection goes. I did not install the spring myself, but it can easily be done if you follow the instructions on NYROC's site. Good luck w/ your purchase![img]i/expressions/face-icon-small-smile.gif[/img]
#17
#18
#19
#20